Pro-Ject: 6Perspex SB Balanced Acrylic Turntable w/ Pick It MC3 (Installed)

LAB POINTS

• high-end audiophile turntable made from a combination of unique materials including acrylic, Corian, carbon fiber, MDF, and metal.
• includes Pick It MC3 Moving Coil Cartridge pre-installed ($680 value)
• quiet belt drive operation w/ AC motor (DC driven AC generator)
• Corian sub-chassis with magnetic suspension
• resonance-optimized sandwich construction of platter w/ combination of MDF and vinyl layer + screw down record clamp
• inverted main bearing with ceramic ball/plate
• electronic speed control w/ 33/45 switching
• carbon fiber Pro-Ject 9cc Evolution tonearm
• Balanced mini XLR output & RCA/ground output
• top grade RCA cable included (Pro-Ject Connect It E)
• dust cover included

“Pro-ject’s 6 PerspeX SB turntable delivers high end sound and functionality with stunning good looks. The acrylic plinth is the first thing you notice, a unique detail that is visibly appealing, that stands on three height adjustable TPE damped aluminum cones. The Corian sub-chassis rests on three magnetic fields that create a suspension system that avoids parasitic noise normally caused by con-ventional spring mechanisms. The resonance-optimized sandwich construction of the platter (a combination of MDF and vinyl layer + screw down record clamp) runs on an inverted bearing with stainless-steel axle carrying a ceramic ball/plate bearing. The pre-mounted 9” carbon fiber Pro-Ject 9cc Evolution tonearm rounds out this premium system. Comes complete with dustcover, counterweights, top grade RCA connection cable (Pro-Ject Connect It E), and pre-mounted Pick It MC3 cartridge.” – TTL

TECH SPECS

• speed: 33/45 (electronic speed change)
• belt drive operation
• platter: MDF/vinyl Sandwich (300mm diameter)
• mains bearing: inverted stainless steel with ceramic ball/plate
• wow & flutter: 33 +/-0.10% / 45 +/- 0.10%
• speed drift: 33 +/-0.10% / 45 +/- 0.06%
• signal to noise: 73dB
• tonearm: 9″ 9cc EVO Carbon
• tonearm bearings with ABEC 7 ballraces
• tracking force: 10 – 35mN
• supplied counterweights: 5 – 7.5gr / 7 – 10gr / 9 – 11gr / 10 – 14gr
• external power supply: 15 volts DC / 800mA
• power connection: 110/120 or 230/240 Volt – 50 or 60 Hz
• dimensions: 18″ x 7.2″ x 14.3″ / 460 x 183 x 365mm
• weight: 24.2 lbs / 11 kg

Pick It MC3 Specs

• output voltage (1 kHz): 0.4mV (3.54cm/sec)
• channel separation (1 kHz): 30dB
• tracking ability (315Hz): 70m
• frequency response: 20Hz-20kHz (+/- 1dB)
• stylus type: hyper-spherical
• stylus tip radius: 5 x 250m
• tracking force range: 1.8-2.2g (18-22mN)
• recommended tracking force: 2g (20mN)
• tracking angle: 20
• recommended load resistance: 100-220
• cartridge weight: 9.6g
• break-in period: 30 hours

COMES WITH

• Pick It MC3 (pre-mounted)
• Connect It E RCA Phono cable
• record clamp
• dust cover

ABOUT TRUE BALANCED AUDIO

• True Balanced Audio refers to a superior audio signal that results in higher sound quality with nearly zero background noise, check out our in-depth guide here
• True Balanced gear can be utilized as both balanced (with the proper components and signal path) or non-balanced
• True Balanced Audio requires a moving coil cartridge (MC) or the Pro-Ject Pick it Pro Balanced MM Cartridge
• True Balanced Audio requires a balanced audio cable (5-Pin DIN, mini XLR / XLR, or RCA > Mini XLR) connected from the turntable to the preamp
• True Balanced Audio requires a preamp that accepts balanced cables; you can output either XLR (recommended) or RCA from the preamp to speakers / amplifier
• shop all Pro-Ject True Balanced